Product ID:BLOCKFILLER WHITE, 080250
MSDS Date:12/13/1988
FSC:8010
NIIN:00N052156
MSDS Number: BTZTL

BENNETTE PAINT MANUFACTURING CO INC

401 INDUSTRY DR
HAMPTON, VA 23661
US

Emergency Phone: 804-838-7777

Info Phone: 804-838-7777

Cage: 3Y107

BENNETTE PAINT MANUFACTURING CO INC

HAMPTON, VA 23661 US

Telephone: 804-838-7777

Cage: 3Y107

0.1 @ 68F.

CAS: 107-21-1

RTECS: KW2975000

Fraction By Weight: <5%

OSHA PEL N/K

ACGIH TLV: 50 PPM, VAPOR, C

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

MINERAL OIL, PETROLEUM DISTILLATE HYDROTREATED (SEV) HVY

CAS: 64742-52-5

RTECS: PY8035001

OSHA PEL N/K

ACGIH TLV: 5 MG/M3 (MFR)

0.19 LB/GAL (23 G/L).

RTECS: 9999999VO

Fraction By Weight: SEE ING

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL:AMMONIA, FORMALDEHYDE & RESIDUAL
MONOMER VAPORS MAY BE IRRITATING TO EYES, SKIN, MUCOUS MEMBRANES,
RESPIRATORY TRACT & MAY PRODUCE SYMPTOMS OF HEADACHE, NAUSEA IN
POORLY VENTILATED AREAS. SKIN:P ROLONGED OR REPEATED CONTACT
W/PAINT MAY CAUSE IRRITATION. EYE:DIRECT CONTACT W/PAINT MAY RESULT
IN (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:IRRITATION. INGEST:DO NOT INGEST.
Medical Cond Aggravated by Exposure:ALLERGY OR SKIN SENSITIZATION.

First Aid:INHAL:MOVE SUBJECT TO FRESH AIR. EYE:IMMEDIATEY FLUSH
W/PLENTY OF WATER FOR AT LEAST 15 MINUTES & CONSULT MD. SKIN:WASH
THOROUGHLY W/SOAP. INGEST:GIVE TWO GLASSES OF WATER TO DRINK & CALL
MD.

Flash Point Method:TCC
Flash Point:200F,93C
Extinguishing Media:FOAM, CO*2, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:USE NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP .
WATER MAY BE USED TO COOL CLSD CNTNRS TO PVNT PRESS BUILD-UP & POSS
EXPLO WHEN EXPOS TO EXTREME HEAT.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT.

Spill Release Procedures:RECOVER LIQUID W/ABSORBENT MATERIAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:KEEP OUT OF REACH OF CHILDREN.
Other Precautions:AVOID PROLONGED CONTACT W/SKIN.

Respiratory Protection:IN CONFINED AREAS & WHEN SPRAYING, USE
NIOSH/MSHA APPROVED RESPIRATORY DEVICE.
Ventilation:PROPER VENTILATION.
Protective Gloves:RUBBER GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:NONE NEEDED UNLESS SPECIAL EQUIPMENT
DESIRED.
Work Hygienic Practices:WASH HANDS AFTER USE, BEFORE EATING OR USING
WASHROOM.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Boiling Pt:B.P. Text:>212F,>100C
Vapor Pres:SEE ING 1
Vapor Density:HVR/AIR
Spec Gravity:1.7 (H*2O=1)
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:SOLUBLE
Appearance and Odor:VISCOUS LIQUID; MILD ODOR.

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:EXTREME TEMPERATURES IN CLOSED CONTAINERS.
Hazardous Decomposition Products:NONE.

Waste Disposal Methods:DISPOSE OF I/A/W LOCAL, STATE & FEDERAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.